|
|
ftServer® System Tools
Software should be downloaded from this area and
installed under the direction of a representative of
Stratus Customer Services or your Stratus-authorized support
provider.
ftServer Systems -
Models 2500, 4400 and 6200
Using Windows Server 2003™
R2 Operating Systems
Tools and utilities for 3rd generation ftServer
Systems.
The latest information and files appear at the top of
the list for each tool.
Please review any README file within the download for further
information.
|
|
|
Double-Take®
Evaluation Activation Tool
| Date |
OS
Version |
Tool Version |
Notes |
2007-10-25
2007-12-04 Updated |
5.1.0.0 |
2.0 |
The pre-installed Double-Take® application in
ftServer Software release 5.1.0.0 for Windows,
does not provide the 14 day evaluation period.
The utility
DTEvalActivate.exe
provides the ability to present the 14 day
evaluation period for acceptance, on the
pre-installed Double-Take® Application.
Refer to the README.txt file in the download
for details about using the utility. |
 ftstools/DTEvalActivate200.zip
5 KB |
|
|
|
ftServer System
ftDataCollector Tool
| Date |
OS
Version |
Tool
Version |
Notes |
| 2007-12-04 |
5.0.0 + |
5.3.5 |
ftDataCollector.exe is a standalone diagnostic data
collection utility for ftServer Systems operating Microsoft Windows
Server 2003. The package
ftDataCollectorSetup.exe self-extracts and installs the
utility. This utility can be installed and run on any ftServer which
runs ftServer System Software (ftSSS) 5.0.0 and above.
NOTICE: This data
collection utility should be used under the direction of your
support provider.
Note:
ftSSS
releases can contain a version of ftDataCollector included at the
time of the ftSSS release, which could be a later release than this
version. It is located in
C:\Program Files\ftSys\CustomerService\SupportTools (32 bit)
or
C:\Program Files (x86)\ftSys \CustomerService\SupportTools (64 bit).
Refer to the README.txt file in the download for details about using
the utility. |
ftstools/ftDatCollectorSetup.v5.3.5.zip
1.817 MB |
|
|
Software Upgrade Readiness
Test Utility
| Date |
OS
Version |
Tool Version |
Notes |
|
2007-10-26 |
5.0.0+ |
5.1.1428 |
5.1READINESSTEST is a standalone Pre-Upgrade
Check utility for ftServer System Software
(ftSSS) release 5.1.0 for Windows.
The package 5.1READINESSTEST.EXE self-extracts,
self-runs, provides test results and
self-destructs. This utility can be run on any
ftServer 2500, 4400 and 6200 system to
determine what is required to upgrade from the
existing ftServer System Software release to
5.1.0
Refer to the README.txt file in the download
for details about using the utility. |
ftstools/5.1READINESSTEST.zip
527 KB |
|
|
|
SRAVerifyLUNS Tool
| Date |
OS
Version |
Tool Version |
Notes |
2005-03-29
2007-10-24
Updated to 2.0 |
1.0+ |
2.0 |
SRAVerifyLUNS is a
script that will run the Verify LUN task on a pair of
RDR disks each time it is invoked. This is useful
when the Verify Interval has been set to 0 on a system.
This script may be invoked either manually or as a
Scheduled Task in order to perform the verification
tasks for a specific disk pair.
Refer to the README.rtf file in the download for
further information about using the script.
Further information on the general subject may be found
in Alert #2206. |
sraverifyluns.zip
9 KB |
|
| |
|
| The software
available through this area of the Stratus web site is intended
for use only on Stratus ftServer architecture systems; any other
use is not supported by Stratus Technologies, and in fact, could
possibly damage the hardware, software, or data on such non-ftServer
systems. Download software from this area only under the
direction of Stratus Customer Services or your
Stratus-authorized support provider. |
